Inquiry: securing and holding

Our project:

Planned function of the clamping head in the machine / system:

1. Force and load

Load direction:

Secure / hold in one direction only
Secure / hold in both directions

Secure / hold in one direction only

2. Safety

Protective function:*

Protective function

People are protected by the clamping head
Machine parts / workpieces are protected by the clamping head
This is a functional clamping that is required for the machine to function properly

Safety factor:*

Safety factor

Not required
Still undefined
Custom factor (provide below)

Clamping:*

Clamping

Static clamping (the rod is always stationary during the clamping process)
Dynamic clamping (occasional emergency braking)

3. Function

Desired actuation by:

Desired actuation (Hydraulics)

Hydraulics

Desired actuation (Pneumatics)

Pneumatics

Type of function:

Type of function

Electric would be desirable
Purely mechanical would be desirable (only possible in conjunction with a load-bearing device such as rope, chain, belt, …)

Functionality of the clamping head:

Clamps:

absolutely in case of switch-off / failure of the pressure
Pressure is also permitted (only if no safety function)

Release:

through pressure
When the pressure is switched off / fails

Dissolving process:

Must always be possible regardless of the load condition without any movement of the rod (Caution! A lifted load may fall as a result of the release if it is not supported in any other way).
Release under load should not be possible: Release is automatically linked to a release of the clamping head in the control system (protection against unintentional release)

Position

Position must be held exactly after clamping.
Permissible travel of the rod when clamping

Special version:

Max. torque at the same time to be held

(Clamping only at standstill, no braking from the rotational movement possible)

4. General specifications

Switching frequency:*

Cycles per year:

Rod diameter:

Rod diameter

Not specified
Fixed at (mm)

Direction of force:

Direction of force

Horizontal
Vertical

Arrangement:

Upload sketch

Drag & Drop Files, Choose Files to Upload, or Capture With Your Camera You can upload up to 3 files.

Insert sketch if possible (max. 3 files with max. 5 MB per file in the formats .pdf / .jpg / .png )

Clamping head:

Clamping head

Built-in stationary
Traveling along the axis to be secured

Constructive upper limits:

Max. overall height / length:

Max. outer diameter / edge length:

Weight

As small as possible, because it moves with you
Custom weight limit

date Personal limit

Attachment of the clamping head:

Attachment of the clamping head:

The clamping head is not attached directly to a cylinder
The clamping head is attached directly to a cylinder

Rod during operation:

Rod during operation

Rod must be able to leave the clamping head completely during operation

Note: Lateral forces on the clamping head are not permitted and must be absorbed by suitable bearings

5. Personal Data

Company

Your name

Department

Email

Phone

Street / No.

Postcode / City

Country

Contact preference

Please call me
please email me

6. Potential need (optional)

Price enquiry:

Please send us your most favourable offer:

Frequency

once
per month
per year

Requested quantity

Desired delivery date

Other notes

Inquiry

securing and holding